7295 Electric Rope Shovel
Overview
One of our mid-range shovels, the Cat 7295 provides proven Cat AC IGBT electronics and a robust front end design. The 7295 provides a 50-ton (45-tonne) payload, plus three- and four-pass loading capability with the Cat 785 ,789 and 793 mining trucks for an optimal loading and hauling operation.
Specifications
| Dipper Payload | 50 t |
| Dipper Capacity | 19.1-38.2 m3 (25-50 yd3) |
| Note | Dependent on application and material density. |
| Dipper Payload | 45 t |
| Dipper Capacity | 19.1-38.2 m3 (25-50 yd3) |
| Note | Dependent on application and material density. |
Docs & Links
Specifications
| Dipper Payload | 50 t |
| Dipper Capacity | 19.1-38.2 m3 (25-50 yd3) |
| Note | Dependent on application and material density. |
| Working Weight - With Dipper and Standard Links | 1748837 lb |
| Ballast - Furnished By Customer | 352000 lb |
| Note (1) | These weights will vary slightly depending upon dipper and optional equipment selection. |
| Note (2) | All specifications are based on a 19 m3 (25 yd3) dipper and standard 182.9 cm (72 in) treads. |
| Ground Bearing Pressure | Ground bearing pressure is dependent upon many factors. |
| Crawler Dimensions - Overall Width 182.9 cm (72 in) Treads, Standard | 28.22 in |
| Ground Bearing Pressure - 182.9 cm (72 in) Treads | 39 in |
| Upper Works Overall Width - Including Standard Walkways | 41.33 in |
| Planetary Propel | Dual-motor independent drive. |
| Swing | Parallel shaft gear cases, driven by a vertically mounted motor, are located on either side of the revolving frame. |
| Ground Bearing Pressure - Total Effective Bearing Area | 315.6 ft² |
| Hoist | A motor coupled to two gear reductions drives a 137 cm (54 in) hoist drum. |
| Dumping Height - With Clearance to Open Dipper Door | 27.56 ft |
| Cutting Radius - Maximum | 67.59 ft |
| Revolving Frame Tail Swing Radius | 25.59 in |
| Radius of Level Floor | 48.88 ft |
| Cutting Height - Maximum | 45 ft |
| Note (1) | Optimal working ranges based on loading a Cat® 785D truck. |
| Note (2) | *All specifications are based on a 19 m3 (25 yd3) dipper and standard 182.9 cm (72 in) treads. |
| Type | Automatic, single-line system for open gear lubricant and grease. |
| Components (1) | 6 pumps (4 for open gear lubricant and 2 for grease) located in an insulated, heated, double-walled lube room. |
| Power Requirements - 60 Hz | 4,160V, 7,200V |
| Power Requirements - Peak power | 2886 HP |
| Drive | IGBT Acutrol drive system. |
| Power Requirements - Voltage | 3 phase, 50/60 Hz, 7,200V |
| Power Requirements - 50 Hz | 6,000V, 6,600V, 7,200V |
| Power Requirements - Average Power Demand | 538-753 kW (721-1,010 hp) |
| Note | Other voltages available to suit customer requirements. |
| Standard Rope Data - Retract - Diameter | 2.25 in |
| Standard Rope Data - Dipper Trip - Diameter | 0.625 in |
| Standard Rope Data - Boom Suspension - No. | 4 |
| Standard Rope Data - Crowd - No. | 1 |
| Standard Rope Data - Boom Suspension - Diameter | 2.75 in |
| Components | One piece, forged, seamless tubular dipper handle and wide-spread boom point sheaves equipped with hoist ropes and dipper padlocks to stabilize dipper handle. |
| Standard Rope Data - Retract - No. | 1 |
| Standard Rope Data - Hoist - Diameter | 2.375 in |
| Standard Rope Data - Crowd - Diameter | 2.25 in |
| Standard Rope Data - Dipper Trip - No. | 1 |
| Crowd | Rope Crowd: the crowd machinery is located at the front center of the revolving frame; consisting of a motor, brake, drum and gearing. Plastic-impregnated crowd and retract ropes are used to move the dipper handle fore and aft. |
| Standard Rope Data - Hoist - No. | 2 |
| Note | High impact ropes available as an option |
| Components (2) | External fast fill from lower level. |
| Dipper Payload | 45 t |
| Dipper Capacity | 19.1-38.2 m3 (25-50 yd3) |
| Note | Dependent on application and material density. |
| Working Weight - With Dipper and Standard Links | 793259 kg |
| Ballast - Furnished By Customer | 159665 kg |
| Note (1) | These weights will vary slightly depending upon dipper and optional equipment selection. |
| Note (2) | All specifications are based on a 19 m3 (25 yd3) dipper and standard 182.9 cm (72 in) treads. |
| Ground Bearing Pressure | Ground bearing pressure is dependent upon many factors. |
| Crawler Dimensions - Overall Width 182.9 cm (72 in) Treads, Standard | 8.6 cm |
| Ground Bearing Pressure - 182.9 cm (72 in) Treads | 269 cm |
| Upper Works Overall Width - Including Standard Walkways | 12.6 cm |
| Planetary Propel | Dual-motor independent drive. |
| Swing | Parallel shaft gear cases, driven by a vertically mounted motor, are located on either side of the revolving frame. |
| Ground Bearing Pressure - Total Effective Bearing Area | 29.3 m² |
| Hoist | A motor coupled to two gear reductions drives a 137 cm (54 in) hoist drum. |
| Dumping Height - With Clearance to Open Dipper Door | 8.4 m |
| Cutting Radius - Maximum | 20.6 m |
| Revolving Frame Tail Swing Radius | 7.8 m |
| Radius of Level Floor | 14.9 m |
| Cutting Height - Maximum | 13.7 m |
| Note (1) | Optimal working ranges based on loading a Cat® 785D truck. |
| Note (2) | *All specifications are based on a 19 m3 (25 yd3) dipper and standard 182.9 cm (72 in) treads. |
| Type | Automatic, single-line system for open gear lubricant and grease. |
| Components (1) | 6 pumps (4 for open gear lubricant and 2 for grease) located in an insulated, heated, double-walled lube room. |
| Power Requirements - 60 Hz | 4,160V, 7,200V |
| Power Requirements - Peak power | 2152 kW |
| Drive | IGBT Acutrol drive system. |
| Power Requirements - Voltage | 3 phase, 50/60 Hz, 7,200V |
| Power Requirements - 50 Hz | 6,000V, 6,600V, 7,200V |
| Power Requirements - Average Power Demand | 538-753 kW (721-1,010 hp) |
| Note | Other voltages available to suit customer requirements. |
| Standard Rope Data - Retract - Diameter | 57 mm |
| Standard Rope Data - Dipper Trip - Diameter | 16 mm |
| Standard Rope Data - Boom Suspension - No. | 4 |
| Standard Rope Data - Crowd - No. | 1 |
| Standard Rope Data - Boom Suspension - Diameter | 70 mm |
| Components | One piece, forged, seamless tubular dipper handle and wide-spread boom point sheaves equipped with hoist ropes and dipper padlocks to stabilize dipper handle. |
| Standard Rope Data - Retract - No. | 1 |
| Standard Rope Data - Hoist - Diameter | 60 mm |
| Standard Rope Data - Crowd - Diameter | 57 cm |
| Standard Rope Data - Dipper Trip - No. | 1 |
| Crowd | Rope Crowd: the crowd machinery is located at the front center of the revolving frame; consisting of a motor, brake, drum and gearing. Plastic-impregnated crowd and retract ropes are used to move the dipper handle fore and aft. |
| Standard Rope Data - Hoist - No. | 2 |
| Note | High impact ropes available as an option |
| Components (2) | External fast fill from lower level. |
Related Products
Title
Lorem Ipsum is simply dummy text of the printing and typesetting industry. Lorem Ipsum has been the industry's standard dummy text ever since the 1500s, when an unknown printer took a galley of type and scrambled it
| 100 | 200 | # | # |
|---|---|---|---|
| 1 | # | 1 | # |